HighPoint R1108 Series Snelle installatiehandleiding - Pagina 8
Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} HighPoint R1108 Series. HighPoint R1108 Series 10 pagina's. Replacing the thermal silicone
Ook voor HighPoint R1108 Series: Snelle installatiehandleiding (10 pagina's), Snelle installatiehandleiding (6 pagina's)
Pagina afdrukken
Step 10. On the rear of the R1108, refasten the 6 screws that were
removed in step 1.
Note
Make sure the aluminum cover is properly aligned with the
：
controller board (PCB), and that it makes full contact with the thermal
pad, before refastening it to the R1108. If the cover is improperly
installed, the fan and thermal pad will be unable to sufficiently cool the
NVMe SSD's and controller componentry, which may result in damage
to the SSD's or controller hardware, performance loss, unstable I/O,
and the loss of data.
Step 11. Power up the SSD external power supply
Note:
If the external power supply is not powered on, the SSDs may
drop offline or remain undetected, which could lead to data loss.
8