DYNAVAC Raptor Vac 사용 설명서 - 페이지 14
{카테고리_이름} DYNAVAC Raptor Vac에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DYNAVAC Raptor Vac 17 페이지. Non-conductive, dry, electric portable vacuum systems, m class dry vacuum
페이지 인쇄Description of electro/pneumatic controls
(B) BLACK ELECTRIC SWITCH (I O II)
(select different working modes)
MODE "0": machine is off
MODE "I": the motors are working with cyclic cleaning of the cartridge filter
MODE "II": electro/pneumatic telecontrol system is in automatic mode and the
cleaning of the cartridge filter are working.
Vacuum cleaner engine turns on or off automatically depending on whether or
not the following accessories are on or off:
1-
the electro-tool connected to the supplementary socket (max W or A see
label on the plug "S")
2-
the air tool connected to the compressed air socket (V1).
To connect the electro tool the maximum power (W or A max) achievable is
printed on the label placed on socket's flap.
When the tool is switched off, after about 8'' the vacuum cleaner motor will
switch off.
IMPORTANT INFORMATION WHEN CONNECTING ELECTRO/PNEUMATIC
TOOLS TO THE VACUUM CLEANER
WARNING: The manufacturer is not responsible for damages to people or
things due to an incorrect or negligent use of the ELECTRIC REMOTE CON-
TROL DEVICE.
WARNING: THE ADDITIONAL SOCKET IS ALWAYS UNDER POWER WHEN
THE MACHINE PLUG IS CONNECTED TO POWER SUPPLY
WARNING: BEFORE CONNECTING ELECTRICAL OR PENUMATIC TOOLS
TO THE SUCTION MACHINE CHECK THAT THEY ARE SWITCHED OFF
WARNING: BEFORE TURNING THE ELECTRIC SWITCH ON THE VACUUM
MACHINE TO "0" CHECK THAT THE TOOL IS OFF
WARNING: When using electro-tools, do not exceed the power reported on the
vacuum cleaner additional socket. Check that the electro-tool input voltage cor-
responds to what is reported on the technical data plate on the vacuum cleaner.
Non-observance of these rules can cause serious accidents and damages to
the user, also leading to death. It is necessary that the vacuum machine is con-
nected to a grounded socket.