HighPoint SSD7000 Series 설치 매뉴얼 - 페이지 7

{카테고리_이름} HighPoint SSD7000 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint SSD7000 Series 14 페이지. Linux rocky linux
HighPoint SSD7000 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (12 페이지)

페이지 인쇄

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

Step 6 Install Rocky Linux

For Example：Rocky Linux9.1

a. Before you do the following, verify the status of your network environment. To

ensure a proper installation, it is recommended to disconnect the network and install

the system in a network less environment.

b. In sert the USB flash drive to the target system.

c. Booting from Bootable USB drive (EFI mode).

d. When the Installation screen appears, press 'e' to edit boot command line option .

On the edit command window, move the cursor to the end of line "linuxefi /images /

pxeboot... ", and append "modprobe.blacklist=nvme " (double quotation mark are not

include).

Press CTRL+X or F10 to start the system.

e. When the following window appears during the installation process,

Press CTRL+ALT+F2 to switch to the shell on console 2, and press ENTER to activate

this console.

and the then execute following commands to copy the driver contents:

# mkdir /hptdd

# mount /dev/sda1 /hptdd/

← Create mount point for USB flash drive

← Mount the USB flash drive to /hptdd

- 5 -