HighPoint SSD7000 Series Installatiehandleiding - Pagina 7
Blader online of download pdf Installatiehandleiding voor {categorie_naam} HighPoint SSD7000 Series. HighPoint SSD7000 Series 14 pagina's. Linux rocky linux
Ook voor HighPoint SSD7000 Series: Installatiehandleiding (16 pagina's), Installatiehandleiding (12 pagina's)
Pagina afdrukken
Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide
Step 6 Install Rocky Linux
For Example：Rocky Linux9.1
a. Before you do the following, verify the status of your network environment. To
ensure a proper installation, it is recommended to disconnect the network and install
the system in a network less environment.
b. In sert the USB flash drive to the target system.
c. Booting from Bootable USB drive (EFI mode).
d. When the Installation screen appears, press 'e' to edit boot command line option .
On the edit command window, move the cursor to the end of line "linuxefi /images /
pxeboot... ", and append "modprobe.blacklist=nvme " (double quotation mark are not
include).
Press CTRL+X or F10 to start the system.
e. When the following window appears during the installation process,
Press CTRL+ALT+F2 to switch to the shell on console 2, and press ENTER to activate
this console.
and the then execute following commands to copy the driver contents:
# mkdir /hptdd
# mount /dev/sda1 /hptdd/
← Create mount point for USB flash drive
← Mount the USB flash drive to /hptdd
- 5 -