HighPoint SSD7103 설치 매뉴얼 - 페이지 10

{카테고리_이름} HighPoint SSD7103에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint SSD7103 12 페이지. Linux ubuntu desktop 19.10
HighPoint SSD7103에 대해서도 마찬가지입니다: 설치 매뉴얼 (11 페이지), 설치 매뉴얼 (11 페이지), 설치 매뉴얼 (15 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (13 페이지), 설치 매뉴얼 (11 페이지), 설치 매뉴얼 (11 페이지), 빠른 설치 매뉴얼 (9 페이지), 설치 매뉴얼 (12 페이지)

HighPoint SSD7103 설치 매뉴얼
SSD7103 Linux CentOS7.8 Installation Guide
k. Follow the prompts to complete the driver installation.
l.
After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.
There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver
status and send control commands to the driver.
Note
The file name is the SCSI host number allocated by OS. If you have no other SCSI cards
installed, it will be 0. In the following sections, we will use x to represent this number.
Using the following command to show driver status:
# cat /proc/scsi/hptnvme /x
This command will show the driver version number, physical device list and logical device
list.

4 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard
disks and RAID arrays attached to
Please refer to HighPoint RAID Management Software documents for more information.

5 Trouble Shooting

If you do not install the system or update the kernel according to the installation manual,
the system will crash and you will not be able to enter. Please follow the steps below.
a.
Select the default kernel (3.10.0-1127.el7.x86_64)and enter the system.
controller.
SSD7103
- 8 -