HighPoint SSD7103 Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} HighPoint SSD7103. HighPoint SSD7103 12 pagina's. Linux ubuntu desktop 19.10
Ook voor HighPoint SSD7103: Installatiehandleiding (11 pagina's), Installatiehandleiding (11 pagina's), Installatiehandleiding (15 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (13 pagina's), Installatiehandleiding (11 pagina's), Installatiehandleiding (11 pagina's), Snelle installatiehandleiding (9 pagina's), Installatiehandleiding (12 pagina's)

SSD7103 Linux CentOS7.8 Installation Guide

k. Follow the prompts to complete the driver installation.

After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.

There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver

status and send control commands to the driver.

Note

The file name is the SCSI host number allocated by OS. If you have no other SCSI cards

installed, it will be 0. In the following sections, we will use x to represent this number.

Using the following command to show driver status:

# cat /proc/scsi/hptnvme /x

This command will show the driver version number, physical device list and logical device

list.

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to

Please refer to HighPoint RAID Management Software documents for more information.

If you do not install the system or update the kernel according to the installation manual,

the system will crash and you will not be able to enter. Please follow the steps below.

Select the default kernel (3.10.0-1127.el7.x86_64)and enter the system.

controller.

SSD7103

- 8 -