Dynavision D2 마운팅 매뉴얼
{카테고리_이름} Dynavision D2에 대한 마운팅 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynavision D2 3 페이지.
페이지 인쇄Mounting the D2/Stand
D2 unit
D2 Stand
Tools required: Socket Set
¼" x 1" nut and bolt set – 4
¼ washers - 8
The D2 and the Stand will have to be raised and lowered separately. It is very
important to take note when lowering or raising each unit.
Mounting Locations.
Secure #4
Secure #3
Secure #1
Secure #2
Secure the D2 and Stand using nuts and bolts with washers for each secure point.
Replace the D2 cover plate after when all the nuts and bolts are secured.