HighPoint RocketRAID mini-SAS 6G HBA Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} HighPoint RocketRAID mini-SAS 6G HBA Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint RocketRAID mini-SAS 6G HBA Series 12 페이지. Bootable raid
HighPoint RocketRAID mini-SAS 6G HBA Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지)

페이지 인쇄

We recommend proper grounding by using a grounding strap. Make sure to work in

a clean and static-free area, and avoid wearing clothing that retains static charges.

Part 3 - Hardware Installation and Verification

Before installing the RocketRAID mini-SAS 6G series controller

Make sure computer is turned off and unplugged from its power source

Take appropriate electrostatic discharge precautions:.

Remove the PCIe slot cover.

Gently insert the RocketRAID mini-SAS 6G series controller into the PCIe slot and

secure the bracket to the computer chassis according to your chassis specifications.

After installing the RocketRAID mini-SAS 6G series controller, restart your computer.

After your computer has started, insert the Driver & Software Installation Disc to

install the necessary drivers for your computer's operating system.

Hardware Verification

Verifying the RocketRAID mini-SAS 6G series controller is installed into the Mac Pro

system:

Step 1: Click on About this Mac

Step 2: Click on More Info

Step 3: Click on System Report

Step 4: Click on PCI Cards

Step 5: The RocketRAID mini-SAS 6G series controller will be identified as SCSI.

Step 6: Verify the RocketRAID mini-SAS 6G HBA is detected and no drivers are

installed.

In Mac OS X 10. x ,the Driver Installed will be "No".

Once you have verified that the RocketRAID mini-SAS 6G series controller is

detected you can proceed to the Driver and Software Installation.