HighPoint RocketRAID mini-SAS 6G HBA Series Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з монтажу для Контролер HighPoint RocketRAID mini-SAS 6G HBA Series. HighPoint RocketRAID mini-SAS 6G HBA Series 12 сторінок. Bootable raid
Також для HighPoint RocketRAID mini-SAS 6G HBA Series: Посібник з монтажу (13 сторінок)
Друкувати сторінкуWe recommend proper grounding by using a grounding strap. Make sure to work in
a clean and static-free area, and avoid wearing clothing that retains static charges.
Part 3 - Hardware Installation and Verification
Before installing the RocketRAID mini-SAS 6G series controller
Make sure computer is turned off and unplugged from its power source
Take appropriate electrostatic discharge precautions:.
Remove the PCIe slot cover.
Gently insert the RocketRAID mini-SAS 6G series controller into the PCIe slot and
secure the bracket to the computer chassis according to your chassis specifications.
After installing the RocketRAID mini-SAS 6G series controller, restart your computer.
After your computer has started, insert the Driver & Software Installation Disc to
install the necessary drivers for your computer's operating system.
Hardware Verification
Verifying the RocketRAID mini-SAS 6G series controller is installed into the Mac Pro
system:
Step 1: Click on About this Mac
Step 2: Click on More Info
Step 3: Click on System Report
Step 4: Click on PCI Cards
Step 5: The RocketRAID mini-SAS 6G series controller will be identified as SCSI.
Step 6: Verify the RocketRAID mini-SAS 6G HBA is detected and no drivers are
installed.
In Mac OS X 10. x ,the Driver Installed will be "No".
Once you have verified that the RocketRAID mini-SAS 6G series controller is
detected you can proceed to the Driver and Software Installation.