HighPoint RocketRAID mini-SAS 6G HBA Series 설치 매뉴얼 - 페이지 10

{카테고리_이름} HighPoint RocketRAID mini-SAS 6G HBA Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint RocketRAID mini-SAS 6G HBA Series 13 페이지. Bootable raid
HighPoint RocketRAID mini-SAS 6G HBA Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지)

페이지 인쇄

Troubleshooting Tip: If the after installing the software package and the Driver

Installed is still "No", please try the following troubleshooting tips.

Step 1: Confirm that you have the RocketRAID eSATA 6G series controller software

package and not another HighPoint RocketRAID series controller that support Mac

OS X.

Step 2: Run the uninstall script, reboot the Mac Pro system and reinstall the

RocketRAID eSATA 6G series controller software once more.

Mac OS X 10.7.x software Installation

Note: Since the driver for the RocketRAID eSATA 6G series controller is embedded

into 10.7.x, you will only need to install the HPT‐eSATA web GUI for Mac 10.6 which

can also be applied to Mac 10.7.x.

Once it is confirmed that the driver is installed and web GUI is installed you can now

proceed to log into the web GUI to create a RAID array.

Note:Remember to flash EFI BIOS before cloning.

Part 5 – Ready to Experience Log into web GUI

Log into the web GUI by entering opening a browser and entering the following URL

http://localhost:7402

Troubleshooting Tip: If you are not able to login to the URL, please check previous

troubleshooting steps to verify that the driver is install and that the RocketRAID

eSATA 6G series controller is detected.