HighPoint RocketRAID mini-SAS 6G HBA Series Kurulum Kılavuzu - Sayfa 10
Kontrolör HighPoint RocketRAID mini-SAS 6G HBA Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HighPoint RocketRAID mini-SAS 6G HBA Series 13 sayfaları. Bootable raid
Ayrıca HighPoint RocketRAID mini-SAS 6G HBA Series için: Kurulum Kılavuzu (12 sayfalar)
Sayfayı YazdırTroubleshooting Tip: If the after installing the software package and the Driver
Installed is still "No", please try the following troubleshooting tips.
Step 1: Confirm that you have the RocketRAID eSATA 6G series controller software
package and not another HighPoint RocketRAID series controller that support Mac
OS X.
Step 2: Run the uninstall script, reboot the Mac Pro system and reinstall the
RocketRAID eSATA 6G series controller software once more.
Mac OS X 10.7.x software Installation
Note: Since the driver for the RocketRAID eSATA 6G series controller is embedded
into 10.7.x, you will only need to install the HPT‐eSATA web GUI for Mac 10.6 which
can also be applied to Mac 10.7.x.
Once it is confirmed that the driver is installed and web GUI is installed you can now
proceed to log into the web GUI to create a RAID array.
Note:Remember to flash EFI BIOS before cloning.
Part 5 – Ready to Experience Log into web GUI
Log into the web GUI by entering opening a browser and entering the following URL
http://localhost:7402
Troubleshooting Tip: If you are not able to login to the URL, please check previous
troubleshooting steps to verify that the driver is install and that the RocketRAID
eSATA 6G series controller is detected.