HighPoint RocketRAID mini-SAS 6G HBA Series 설치 매뉴얼 - 페이지 7

{카테고리_이름} HighPoint RocketRAID mini-SAS 6G HBA Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint RocketRAID mini-SAS 6G HBA Series 13 페이지. Bootable raid
HighPoint RocketRAID mini-SAS 6G HBA Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지)

페이지 인쇄

Step 2: Click on More Info

Step 3: Click on System Report

Step 4: Click on PCI Cards

Step 5: The RocketRAID eSATA 6G series controller will be identified as RAID

CONTOLLER.

Step 6: Verify the RocketRAID eSATA 6G HBA is detected and no drivers are

installed.

In Mac OS X 10.5.x and 10.6.x the Driver Installed will be "No".

Once you have verified that the RocketRAID eSATA 6G series controller is detected

you can proceed to the Driver and Software Installation.

Troubleshooting Tip: If the RocketRAID eSATA 6G series controller is not detected

please try the following troubleshooting tips.

Step 1: Shut down the Mac Pro system then remove and insert the RocketRAID

eSATA 6G series controller then follow the steps from Hardware Verification.

Step 2: If Step 1 fails, then insert the RocketRAID eSATA 6G series controller into a

different PCIe slot.