Emerson FB2100 현장 교체 매뉴얼 - 페이지 3

{카테고리_이름} Emerson FB2100에 대한 현장 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Emerson FB2100 16 페이지. Flow computer i/o terminal board
Emerson FB2100에 대해서도 마찬가지입니다: 현장 교체 매뉴얼 (16 페이지), 현장 교체 매뉴얼 (8 페이지), 현장 교체 매뉴얼 (14 페이지), 현장 교체 매뉴얼 (16 페이지)

페이지 인쇄
Emerson FB2100 현장 교체 매뉴얼
Removing/Replacing Batteries
The flow computer includes two different types of main battery enclosures. One uses a strap to
hold the battery in place, the other uses a hook-and-loop pad to secure the battery. This guide
includes separate procedures depending upon the battery enclosure used.
Restriction
Hazardous area approvals require that any part replaced in the field be the exact same part (like for
like). Upgrading or substituting different parts violates hazardous area certification.
Refer to the table below for the correct field replacement kit part number
Item
10.5 Ah Lead Acid Battery for use with solar panel
UL Kit File Number: E192567
Important
Use only accessories (batteries) supplied with the flow computer or sold by Emerson as spare parts
for this flow computer. Substituting a part you obtain elsewhere (such as a battery) voids your
approval certification.
Ambient Temperature Range
May be used up to a maximum ambient temperature of 80°C and a minimum ambient
temperature of –40°C; refer to the data plate attached to the device for ambient temperature.
Required Tools
Electrical Ratings
Important
If this equipment is used in a manner not specified by the manufacturer, the protection provided by
equipment may be impaired.
DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.
Performing this operation in a hazardous area could result in an explosion.
DANGER
EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing end cap(s) in a
hazardous location could result in an explosion.
FB2100/FB2200 Flow Computer Battery Field Replacement Guide
#2 Phillips-head screwdriver
Hexagonal torque wrenches. Ranges must include 2 to 4 in-lbs (0.2 to 0.5 N-m).
Input Voltage: 10.5 Vdc to 30 Vdc external supply (Max power at 10 watts)
D301823X012
November 2020
Field Replacement Kit
Part Number
399285-01-0
1