Ader Sports HS-7601B 조립 지침 매뉴얼 - 페이지 2

{카테고리_이름} Ader Sports HS-7601B에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ader Sports HS-7601B 16 페이지. Olympic combo bench

ASSEMBLY INSTRUCTIONS FOR

THE HS-7601B OLYMPIC

TOOLS REQUIRED:

1) 11/16" WRENCH

INSTRUCTIONS:

FIGURE A

1) FIRST INSTALL THE RUBBER CAPS (B) ONTO THE WEIGHT COLUMN

ARMS (A). NEXT INSTALL THE TURN KNOB (D) AND THE REDUCER CAP (C)

ON THE WEIGHT COLUMN ARMS (A).

2) NOW INSTALL THE TOP CROSS MEMBER (E) TO THE WEIGHT COLUMN

ARMS USING THE 3/8" X 2 1/2" BOLT (F), THE 3/8" X 1" BOLTS (I), THE 3/8"

FLAT WASHERS, AND THE 3/8" LOCK NUTS.

3) INSTALL THE BOTTOM CROSS MEMBER (G) ON THE WEIGHT COLUMN

ARMS (A) USING THE 3/8" X 3" BOLTS (H), THE 3/8 FLAT WASHERS, AND THE

3/8" LOCK NUTS.

FIGURE B

1) SLIDE THE WEIGHT ARMS (B) INTO THE WEIGHT COLUMN AND SECURE

THEM WITH THE LOCK PIN (D). NOW SLIDE THE GRIPS (C) ONTO THE

WEIGHT ARMS (B).

FIGURE C

1) ATTACH THE SEAT SLIDE (A) TO THE BACKREST (B) USING THE

3/8" X 2" BOLT (E). NOW BOLT THE SEAT SLIDE (A) TO THE SEAT USING THE

3/8" X 1" BOLT (F) TO THE SEAT (C). NOW INSTALL THE TURN KNOB (D)

INTO THE SEAT SLIDE (A)

FIGURE D

1) SLIDE THE SEAT ASSEMBLY (A) ONTO THE SEAT FRAME (B).

FIGURE E

1) INSTALL THE RUBBER CAPS (C) ONTO THE FOOT (B). NEXT SLIDE THE

FOOT (B) INTO THE SEAT FRAME (A) AND SECURE IT WITH THE LOCK PIN

(D).

2) NOW INSTALL THE SEAT ASSEMBLY (F) ONTO THE SEAT FRAME (A)

USING THE 3/8 X 2 1/2" BOLT (G), THE 3/8" X 1" BOLT (J), THE 3/8 FLAT

WASHERS (H) AND THE 3/8" LOCK NUTS (I).

3) NOW INSTALL THE TURN 3" TURN KNOB (E) AND THE REDUCER CAP (F).

COMBO BENCH

2) 9/16" WRENCHES