AFL FlexScan FS300 빠른 참조 매뉴얼 - 페이지 8

{카테고리_이름} AFL FlexScan FS300에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AFL FlexScan FS300 20 페이지. With smartauto and linkmap

Initiate the SmartAuto test by touching

1. FlexScan begins testing with the Live Fiber check and if a live fiber is NOT detected, proceeds to next step.

2. If the Launch Quality check is enabled, FlexScan checks loss and reflectance of the OTDR connection.

3. If launch quality is good, FlexScan starts testing at both wavelengths using SmartAuto settings.

4. When testing is completed, FlexScan displays the LinkMap

OTDR mode.

LinkMap

View Features

LinkMap is an icon-based representation of the analyzed network.

File name: consists of cable

name and fiber number, or "New

Trace" if file has not been saved

LinkMap detail view: shows

summary and first 4 events,

or up to 5 events. White

highlighted area in thumbnail

view indicates region of fiber

for which events are shown

in the detail view. Touch

an event icon to see more

details about that event.

Testing in SmartAuto

Start soft key or pressing Start/Stop button.

Link map thumbnail view with

proportionally spaced events

OTDR Mode

screen, which is a primary display in SmartAuto

x/y or x1-x2/y, where

x = number of the selected event

x1-x2 = link section between events,

y = total events

Link Length

Back key: touch to return

to the previous menu

Menu key: touch to

navigate to Save As screen