HighSecLabs KM Admin Tool 사용자 설명서 - 페이지 13
{카테고리_이름} HighSecLabs KM Admin Tool에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HighSecLabs KM Admin Tool 15 페이지.
페이지 인쇄Uploading a Custom Layout File Using the KM Loader Tool
This procedure shows how to upload the custom layout file,
created in the previous procedure, to the KM.
Required Hardware:
•
An Admin PC running Windows 7/8/10 OS
Note: An admin PC is only needed for the initial configuration
of the KM with a kmc file. Once configured the KM can be
disconnected and used by a user without an admin PC.
•
A HighSecLabs KM (in this example, the 4-port SM40N-3)
•
An A-A USB cable
•
Standard keyboard
Required Software:
•
KM config file (.KMC) created in the previous procedure
•
KM Loader Tool ver. 1.0.0.5
To upload a custom layout file:
1.
Power on the KM and connect it to the Admin PC.
2.
Connect an A-A cable between a vacant USB port on the
Admin PC and the KM console's mouse port. Note: If that
doesn't work, connect to the keyboard port.
KM Admin Tool | USER MANUAL
3.
Connect the keyboard to the KM console's keyboard or
mouse port (this "talks" directly to the KM).
4.
Press LEFT CTRL | RIGHT CTRL | L to enter loading mode.
The LEDs start flashing.
5.
On the Admin PC, from the following link
http://www.highseclabs.com/support/downloads/?rid=1
9, download and install the KM Loading Tool.
This creates the KM Loading Tool icon on the desktop.
6.
Double-click on the KM Loading Tool icon.
The KMConfigLoader dialog opens:
13