HighSecLabs KM Admin Tool 사용자 설명서 - 페이지 14

{카테고리_이름} HighSecLabs KM Admin Tool에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HighSecLabs KM Admin Tool 15 페이지.

Uploading a Custom Layout File Using the KM Loader Tool

Click Browse and locate and select the .KMC

configuration file created in the previous procedure.

From the Select COM port list, select the COM.

Note: Make sure the correct COM port is selected. To locate

the correct COM port, on the Admin PC, right-click on This PC

and select Manage. Under Computer Management, select

Device Manager. In the window that opens, click on the

arrow next to Ports (COM & LPT) and locate the port that is

connected to the KM.

From the Select port configuration list, select the KM's

number of ports. In this example, select 4.

10. Click Process.

11. Power cycle the KM.

12. Press LEFT CTRL | LEFT CTRL | F11 | F12 to apply the new

settings.

13. If any of the computers in the custom layout have a

primary and secondary display, from the following link:

http://www.highseclabs.com/support/downloads/?rid=1

9, download and install the KM Multi Display Drivers

onto the relevant computers. In this example, install the

KM Multi Display Drivers onto Computer 3 (it has a

KM Admin Tool | USER MANUAL

primary and secondary display).

14. Power cycle and test that the mouse properly switches

control between adjacent displays in the configuration.