Gallo Tech GTS-3RS 작동 및 설치 매뉴얼 - 페이지 13

{카테고리_이름} Gallo Tech GTS-3RS에 대한 작동 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gallo Tech GTS-3RS 16 페이지. Keyless rfid push button start & security system

Power Door Lock Connections:

Determine the Door Locking/Unlocking circuitry that your vehicle is equipped with. Fig. 2 shows the door lock/unlock

output relay & Pin number configuration of the C3 Control Module connector. The majority of vehicles come

equipped with either Neg (-) Fig. 3 or Pos. (+) Fig. 4 Trigger circuits. Find the location of the appropriate circuitry for

your vehicle (Make, Model, Year Diagrams can be found on our web site at www.GalloTech.com) If the Trigger wire

is 0v when the Lock/unlock switch is depressed then you have a Neg. (-) trigger (Fig. 3). If the trigger wire is +12v

when depressing the Lock/unlock switch then you have a Pos. (+) Trigger (Fig 4). For Pre- '95 Audi or Mercedes

Benz vacuum motor operation use Fig. 5. For Reverse Polarity applications, were the lock and unlock wires rest at

Negative Ground, use Fig. 6.

C3: 22 PIN WIRE HARNESS DIAGRAMS:

Only Door Locking/Unlocking Pins #'s shown below

Figure 2

Figure 3

- 13 -

061515V54RS