Cor IBR200 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Cor IBR200에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cor IBR200 7 페이지.

11/2/2020

Insert an activated 2FF-sized SIM card into the SIM slot (contacts down, notch in). The SIM card will click into place. NOTE: To remove, depress the SIM

card.

STEP 4: Close and secure the SIM slot cover.

Slide the SIM cover to the left and replace the screw. Tighten the screw to secure the cover.

STEP 5: Attach the LTE cellular antennas.

Install the LTE cellular (paddle) antennas on the MAIN and AUX ports.

Hold the antenna straight and twist the base to thread onto the connector.

Tighten with fingers only (maximum torque not to exceed 4 in-lbs). o Do not over-tighten.

Once the router is mounted and powered on, angle the antennas for optimal signal reception.

STEP 6: Attach the Wi-Fi antenna.

Install the Wi-Fi antenna on the port marked 2.4/5GHz.

Hold the antenna straight and twist the base to thread onto the connector.

Tighten with fingers only (maximum torque not to exceed 4 in-lbs).

Do not over-tighten.

Once the router is mounted and powered on, angle the antennas for optimal signal reception.

https://customer.cradlepoint.com/s/article/COR-IBR200

COR IBR200 IoT Router Quick Start Guide

3/7