CORA CS1000 사용자 설명서 - 페이지 5

{카테고리_이름} CORA CS1000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CORA CS1000 17 페이지.

페이지 인쇄
CORA CS1000 사용자 설명서
User
Interface

Reset / Status Button

The CS1000 user interface is comprised of the LED status indicators (Figure ) and the button
shown below. Pressing the button quickly, will indicate the current network status discussed
previously.
Figure 3 – Performing Network or Factory Reset on the Door Sensor
Holding the button will perform a network or factory reset:
Network Reset
release. The device will reset all LoRaWAN Settings which do not affect device
operation and reboot. Following reboot, a reset event uplink (confirmed) will be sent
upon rejoining the LoRaWAN network.
Factory Reset
device will reset all parameters to factory defaults. Following reboot, a Factory Reset
event uplink (confirmed) will be sent upon rejoining the LoRaWAN network.
CS1000 Long Range Door Sensor – User Guide
– Press and hold the key button for 10 seconds, but less than 25, then
– Press and hold the key button for > 25 seconds, then release. The
Page 5