CORA CS1000 User Manual - Page 5

Browse online or download pdf User Manual for Accessories CORA CS1000. CORA CS1000 17 pages.

Print Page
CORA CS1000 User Manual
User
Interface

Reset / Status Button

The CS1000 user interface is comprised of the LED status indicators (Figure ) and the button
shown below. Pressing the button quickly, will indicate the current network status discussed
previously.
Figure 3 – Performing Network or Factory Reset on the Door Sensor
Holding the button will perform a network or factory reset:
Network Reset
release. The device will reset all LoRaWAN Settings which do not affect device
operation and reboot. Following reboot, a reset event uplink (confirmed) will be sent
upon rejoining the LoRaWAN network.
Factory Reset
device will reset all parameters to factory defaults. Following reboot, a Factory Reset
event uplink (confirmed) will be sent upon rejoining the LoRaWAN network.
CS1000 Long Range Door Sensor – User Guide
– Press and hold the key button for 10 seconds, but less than 25, then
– Press and hold the key button for > 25 seconds, then release. The
Page 5