Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card 설치 매뉴얼 - 페이지 2
{카테고리_이름} Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card 7 페이지. Usb card bus adapter
Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 사용자 설명서 (16 페이지)
페이지 인쇄
Hardware installation
1. Install USB2.0 EHCI driver. (Please refer to next driver installation)
2. Slide the card bus adapter into your notebook slot gently until it is firmly seated in the PC
card slot. (Please refer to PC card installation guide in your Notebook user manual)
3. When the card bus adapter is inserted into the slot completely, Windows will detect the host
controller automatically.
4. Connect the USB power cable that came with the package. Plug one end of the USB adapter
cable into a USB port on your notebook. You can refer to the following figure for correct
installation.