Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card Installation Manual - Page 2
Browse online or download pdf Installation Manual for Adapter Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card. Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card 7 pages. Usb card bus adapter
Also for Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card: Quick Setup Manual (2 pages), User Manual (16 pages)
Print Page
Hardware installation
1. Install USB2.0 EHCI driver. (Please refer to next driver installation)
2. Slide the card bus adapter into your notebook slot gently until it is firmly seated in the PC
card slot. (Please refer to PC card installation guide in your Notebook user manual)
3. When the card bus adapter is inserted into the slot completely, Windows will detect the host
controller automatically.
4. Connect the USB power cable that came with the package. Plug one end of the USB adapter
cable into a USB port on your notebook. You can refer to the following figure for correct
installation.