highwood Bodhi 조립 설명서 - 페이지 2
{카테고리_이름} highwood Bodhi에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. highwood Bodhi 16 페이지. 10' x 10' pergola
페이지 인쇄INCLUDED HARDWARE
A
1/4"-20 X 1.25"
B
1/4"-20 X 2.00"
C
#7 x 2.25"
D
#7 x 3.00"
E
#8 x 1.00"
F
highwood
NATURE'S CLOSEST RIVAL
x16
x96
x16
x56
x16
x8
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
INCLUDED TOOLS
5/32" HEX BIT (Bolts A , B )
#2 SQUARE BIT (Screw E )
T15 TORX BIT (Screws C , "D")
CUSTOMER-SUPPLIED HARDWARE
ANCHORS SUITABLE FOR THE INSTALLATION
5
SURFACE (MAX.
" DIAMETER).
16
CUSTOMER-SUPPLIED TOOLS
CORDLESS DRILL/SCREWDRIVER
LADDER
LEVEL
TAPE MEASURE
1
" DRILL BIT
8
TOOLS NECESSARY FOR CUSTOMER-SUPPLIED ANCHORS
IMPORTANT!
A MINIMUM of (2) people are required to assmble this product.
DO NOT expose components to direct sunlight prior to assembling.
Remove components from the box as they are needed for assembly.
DO NOT fully tighten the bolts until all bolts are started.
Once all bolts are inserted, go back & tighten all bolts.
Ensure all pre-drilled holes are clear of any debris.
This will allow for easier assembly.
Retain these instructions for future reference
x16
AD-PGLA-1010
12.20.19
PAGE 2 of 16