highwood Bodhi 조립 설명서 - 페이지 4
{카테고리_이름} highwood Bodhi에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. highwood Bodhi 16 페이지. 10' x 10' pergola
페이지 인쇄Post (x2)
1) Set Two Posts on a Flat Surface
Approximately 6 Feet Apart as Shown.
2) Align (1) "F" Metal Angle Bracket with
the Corresponding Hole Pattern on the
Side of Each Post.
highwood
NATURE'S CLOSEST RIVAL
PERGOLA ASSEMBLY
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
"F" Metal Angle Bracket
(2 per Post)
"A" Bolt
(2 per Bracket)
3) Attach (2) "F" Metal Angle Brackets to
the Bottom of Each Post using (2) "A"
Bolts as Shown. Holes in the Brackets
will Align with Holes in the Posts.
4) Proceed to Attach the Remaining "F"
Brackets to the Remaining (2) Posts and
Set these Aside for a Later Step.
AD-PGLA-1010
12.20.19
PAGE 4 of 16