AGS Merlin 1000S 설치 및 운영 매뉴얼 - 페이지 8
{카테고리_이름} AGS Merlin 1000S에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AGS Merlin 1000S 12 페이지. Gas utility isolation controller
AGS Merlin 1000S에 대해서도 마찬가지입니다: 사용자 및 설치 매뉴얼 (10 페이지), 설치, 운영 및 유지보수 매뉴얼 (10 페이지), 설치 및 운영 매뉴얼 (16 페이지)
페이지 인쇄
Installation & Operation Manual
Fire Panel Integration
The Merlin 1000S can be integrated with a fire alarm to close the gas supply automatically in the event
of a fire. The volt free fire alarm signal can be wired in series with any remote emergency shut off
buttons. If there are no remote emergency shut off buttons being installed, wire this directly to the
terminal marked [EM REMOTE].
Auto Shut-Down - Timeout Period
The system has an auto-shut down feature after a selected time.
There are two switches located on the circuit board labelled [TIME1] & [TIME2].
These can be configured to select the required timeout/ shut-down period.
TIME 1
TIME 2
OFF
OFF
ON
OFF
OFF
ON
ON
ON
Upon timeout the gas supply will be turned off unless other utilities are configured.
General Specification
Model:
Visual Indication
Mains Electrical Power Input
Gas Solenoid Valve Output
Current Consumption
Internal Fuse
Operating Temperature
Audible Alarm Buzzer dB
Pressure Sensor Operating Pressure
Housing Material
Flame Rating
UL Approval Reference
O/All Dimensions (H x W x D) mm / inch
Rev: 10
02-21
Timeout Period
2 Hours (Default)
4 Hours
8 Hours
Disabled
1000S
LED
110-120VAC
110-120VAC
12W max (50mA) @ 120VAC
3.15A
32 – 104°F 0-95%RH Non-Condensing
65 dB (300mm distance in quiet conditions)
0 -1.45psi
Polylac PA-765
UL 94
E464760
7.08 x 10 x 3.03"
Merlin 1000S
8