AGS Merlin 1000S Instrukcja instalacji i obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Kontroler AGS Merlin 1000S. AGS Merlin 1000S 12 stron. Gas utility isolation controller
Również dla AGS Merlin 1000S: Instrukcja obsługi i instalacji (10 strony), Instrukcja instalacji, obsługi i konserwacji (10 strony), Instrukcja instalacji i obsługi (16 strony)
Drukuj stronę
Installation & Operation Manual
Fire Panel Integration
The Merlin 1000S can be integrated with a fire alarm to close the gas supply automatically in the event
of a fire. The volt free fire alarm signal can be wired in series with any remote emergency shut off
buttons. If there are no remote emergency shut off buttons being installed, wire this directly to the
terminal marked [EM REMOTE].
Auto Shut-Down - Timeout Period
The system has an auto-shut down feature after a selected time.
There are two switches located on the circuit board labelled [TIME1] & [TIME2].
These can be configured to select the required timeout/ shut-down period.
TIME 1
TIME 2
OFF
OFF
ON
OFF
OFF
ON
ON
ON
Upon timeout the gas supply will be turned off unless other utilities are configured.
General Specification
Model:
Visual Indication
Mains Electrical Power Input
Gas Solenoid Valve Output
Current Consumption
Internal Fuse
Operating Temperature
Audible Alarm Buzzer dB
Pressure Sensor Operating Pressure
Housing Material
Flame Rating
UL Approval Reference
O/All Dimensions (H x W x D) mm / inch
Rev: 10
02-21
Timeout Period
2 Hours (Default)
4 Hours
8 Hours
Disabled
1000S
LED
110-120VAC
110-120VAC
12W max (50mA) @ 120VAC
3.15A
32 – 104°F 0-95%RH Non-Condensing
65 dB (300mm distance in quiet conditions)
0 -1.45psi
Polylac PA-765
UL 94
E464760
7.08 x 10 x 3.03"
Merlin 1000S
8