Galvin Engineering Ezy-Drink CP Lead Safe 2 in 1 Bottle Filler & Bubbler 설치 매뉴얼
{카테고리_이름} Galvin Engineering Ezy-Drink CP Lead Safe 2 in 1 Bottle Filler & Bubbler에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Engineering Ezy-Drink CP Lead Safe 2 in 1 Bottle Filler & Bubbler 4 페이지.
페이지 인쇄
Product Installation Guidelines
Ezy-Drink
CP Lead Safe
®
45 Degree
PRODUCT CODE
-
170.01.13.00
SPECIFICATIONS
2 in 1 design with bottle filler and bubbler.
Drinking taps are designed to operate at full mains pressure.
The rubber mouthguard is resistant to fungal and bacterial attack and has a high resistance to sunlight.
Vandal resistant push buttons.
Adjustable built-in flow restrictor.
IMPORTANT: All Ezy-Drink
in good working order.
*As 'lead free' is not currently defined by law in Australia and New Zealand, we have based our definition of Lead Safe™ on the requirements of s1417 of the USA's Safe Drinking
Water Act (SDWA) and the relevant US standards NSF61 / NSF372. The SDWA defines 'lead free' as "not more than a weighted average of 0.25% lead when used with respect
to the wetted surface of pipes, pipe fittings, plumbing fittings and fixtures".
WARNINGS: Special attention to be paid on notes, photos, images, or drawings of assembly steps marked
with the warning symbol.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Construction
Finish
NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without
notice.
TOOLS REQUIRED
Power drill
Wrench
Screwdriver
© Galvin Engineering Pty Ltd
2 in 1 Bottle Filler & Bubbler
™
®
2 in 1 taps are tested in accordance with AS/NZS 3718 and leave our premises
Version 1,13
½" BSP Female
Rubber Mouthguard/Bottle Filler
Push Button
Min
50
Max
500
Min
5
Max
60
2.98
Brass
Chrome
th
June 2023, Page 1 of 4