Dynex DX-DRTVM114 조립 설명서 - 페이지 3
{카테고리_이름} Dynex DX-DRTVM114에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-DRTVM114 15 페이지. Support mural discret pour téléviseurs
Dynex DX-DRTVM114에 대해서도 마찬가지입니다: (영어) 수동 조립 가이드 (15 페이지), (프랑스어) 매뉴얼 드 몽타주 (15 페이지)
페이지 인쇄DX-DRTVM114
Tools needed
You will need the following tools to assemble your new TV wall mount:
ardware
Edge-to-edge
stud finder
Phillips screwdriver
Measuring tape
Package contents
Make sure that you have all the hardware necessary to assemble your new TV wall mount:
A Wall Plate (1)
B Left TV Bracket (1)
A
Pencil
Socket wrench with 1/2"
(13 mm) socket or
adjustable wrench
Tape
C Right TV Bracket (1)
D Wall plate template (1)
B
Level
C
Top / Dessus / Vista superior
Tools Needed
Outils nécessaires
Herramientas requeridas
Drill
7/32" (5.5 mm) wood drill bit for
wood stud wall
OR
3/8" (10 mm) masonry drill bit
(concrete only)
Hammer
D
DX-DRTVM114 Wall Plate Template • Gabarit de la plaque murale • Plantilla de la placa de pared
Top / Dessus / Vista superior
Note: For wood frame installations, use
Remarque : Pour des installations sur
des structures en bois, utiliser d'abord
un localisateur de montants pour
détecter un montant en bois.
Nota: para las instalaciones en marcos
de madera, use primero un localizador
de viga para ubicar las vigas de pared.
3
Important: Make sure that the
lag bolts are inserted into a wood
stud. The distance between two
studs is typically 16".
V1 13-0671