Dynex DX-DRTVM114 조립 설명서 - 페이지 5
{카테고리_이름} Dynex DX-DRTVM114에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-DRTVM114 15 페이지. Support mural discret pour téléviseurs
Dynex DX-DRTVM114에 대해서도 마찬가지입니다: (영어) 수동 조립 가이드 (15 페이지), (프랑스어) 매뉴얼 드 몽타주 (15 페이지)
페이지 인쇄DX-DRTVM114
Installation instructions
STEP 1- Determine whether your TV has a flat back or an
irregular or obstructed back
1
Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from
damages and scratches.
2
If your TV has a table-top stand attached, remove the stand. See the documentation that came with your
TV for instructions.
3
Temporarily lay the TV brackets (B and C) on the back of your TV.
4
Align the screw holes in the TV brackets with the mounting screw holes on your TV.
5
Identify which type of back your TV may have:
• Flat back: The brackets lay flush against the back of your TV and do not block any jacks. You do not need
spacers when assembling the wall mount.
• Obstructed back: The brackets block one or more of the jacks on the back of your TV. You will need
spacers when assembling the wall mount.
• Irregularly-shaped back: There is a gap between a bracket and some part of the back of your TV. You
will need spacers when assembling the wall mount.
6
Remove the TV brackets.
5