Dynex DX-DRTVM114 Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з монтажу для Кріплення для телевізора Dynex DX-DRTVM114. Dynex DX-DRTVM114 15 сторінок. Support mural discret pour téléviseurs
Також для Dynex DX-DRTVM114: (Англійська) Посібник зі збирання вручну (15 сторінок), (Французькою) Manual De Montage (15 сторінок)
Друкувати сторінкуDX-DRTVM114
Installation instructions
STEP 1- Determine whether your TV has a flat back or an
irregular or obstructed back
1
Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from
damages and scratches.
2
If your TV has a table-top stand attached, remove the stand. See the documentation that came with your
TV for instructions.
3
Temporarily lay the TV brackets (B and C) on the back of your TV.
4
Align the screw holes in the TV brackets with the mounting screw holes on your TV.
5
Identify which type of back your TV may have:
• Flat back: The brackets lay flush against the back of your TV and do not block any jacks. You do not need
spacers when assembling the wall mount.
• Obstructed back: The brackets block one or more of the jacks on the back of your TV. You will need
spacers when assembling the wall mount.
• Irregularly-shaped back: There is a gap between a bracket and some part of the back of your TV. You
will need spacers when assembling the wall mount.
6
Remove the TV brackets.
5