Galvin Specialised GalvinCare 50197 제품 설치 매뉴얼 - 페이지 3
{카테고리_이름} Galvin Specialised GalvinCare 50197에 대한 제품 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Specialised GalvinCare 50197 4 페이지. Mental health tapware
페이지 인쇄
Fit the handle
5.
Fit the nylon insert and handle, ensuring the arrow on the
handle matches the lines on the faceplate when rotated.
Secure the handle with supplied tamper proof screw.
TROUBLESHOOTING
PROBLEM
Faceplate does not sit flush on
wall
Water flow does not match
faceplate markings
SERVICE AND MAINTENANCE
1. Turn off water
Turn off the water supply and turn on the tap
handle to release any pressure in the lines
Disconnect the plug from controller
Disconnect cold, hot and inlet water
connections
CAUSE
Diverter not mounted
perpendicular to wall
Handle not aligned correctly
to faceplate
Outlet on body not connected
to the correct service outlet
2. Remove handle assembly
6. Testing
Once fitted all parts & connected with
controller, test body for leaks and correct
operation.
RECTIFICATION
Remove and re-mount so the body is
perpendicular to finshed wall
Remove handle and rotate on the spline
until handle matches faceplate. Re-tighten
Change outlet connection on body
Unscrew tamper proof screw from handle
Pull out handle assembly from the body