Dynisco PG542 사용 설명서 - 페이지 6

{카테고리_이름} Dynisco PG542에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynisco PG542 11 페이지. Melt pressure gauges

4 4 4 4 4

2.3

Wiring (all models)

Wiring for all models is accomplished at rear of the gauge enclosure.

A separate kit included with gauge contains different size strain reliefs

to facilitate use with various gauge wire. Insert wire through correct

relief fitting and assemble strain relief as shown in Figure 6. Attach

strain relief assembly to gauge enclosure using four screws provided in

kit, as shown in Figure 7.

NOTE: This device operates on 12 VDC not 120 VAC

Fig. 6 & 7

5 Position Terminal Block -

Alarm Versions Only

1 Relay Contact (N.C.)

2 Common

3 Relay Contact (N.O.)

4 Reset

5 Automatic/Manual

(2 Position Terminal

Block - All Models)

12V Supply (-) (BLK)

12V Supply (+) (Red)

(Power Supply Terminal

Block -G115 Option)

Neutral (WHT)

115 or 230 (BLK)

DYNISCO PG500 Series

Fig. 8