Galvin Specialised Wallgate ALM-08W 제품 설치 매뉴얼 - 페이지 2
{카테고리_이름} Galvin Specialised Wallgate ALM-08W에 대한 제품 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Specialised Wallgate ALM-08W 5 페이지. Anti-ligature, anti-vandal polycarbonate mirror with solid surface surround
페이지 인쇄
INSTALLATION
1. Drill attachment holes
-
Drill ø15 mm holes in the wall to suit the
M10 fixing studs. The positions are
marked in the figure above.
3. Attach studs into wall holes
-
Lift the mirror into place passing the
studs through the holes in the wall and
ensure the mirror sits flat.
Note: The mirror weight is 10 kg. Always use safe
lifting procedures when lifting heavy loads.
Version 1, 6
2. Insert studs to the mirror
-
Fit the four M10 fixing studs to the
threaded inserts on the back of the
mirror and hand tighten.
4. Attach washer and nuts
-
Place a washer and M10 nut onto each
stud and tighten, ensuring the mirror sits
level. (Tighten each nut to 10Nm)
th
April 2021, Page 2 of 5