Galvin Specialised Wallgate ALM-08W Product Installation Manual - Page 2

Browse online or download pdf Product Installation Manual for Indoor Furnishing Galvin Specialised Wallgate ALM-08W. Galvin Specialised Wallgate ALM-08W 5 pages. Anti-ligature, anti-vandal polycarbonate mirror with solid surface surround

Print Page

INSTALLATION

1. Drill attachment holes

Drill ø15 mm holes in the wall to suit the

M10 fixing studs. The positions are

marked in the figure above.

3. Attach studs into wall holes

Lift the mirror into place passing the

studs through the holes in the wall and

ensure the mirror sits flat.

Note: The mirror weight is 10 kg. Always use safe

lifting procedures when lifting heavy loads.

Version 1, 6

2. Insert studs to the mirror

Fit the four M10 fixing studs to the

threaded inserts on the back of the

mirror and hand tighten.

4. Attach washer and nuts

Place a washer and M10 nut onto each

stud and tighten, ensuring the mirror sits

level. (Tighten each nut to 10Nm)

April 2021, Page 2 of 5