Galvin Specialised Flowmatic TZ-FLOW225866 제품 설치 매뉴얼 - 페이지 4
{카테고리_이름} Galvin Specialised Flowmatic TZ-FLOW225866에 대한 제품 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Specialised Flowmatic TZ-FLOW225866 10 페이지. Wall mounted sensor tap battery operated/single temp
페이지 인쇄
SETTINGS ADJUSTMENT
Note: Remote has to be purchased separately.
Adjusting the settings with the remote control
If necessary, the sensor settings can be adjusted as follows:
Shut off the water supply. To adjust the sensor with the remote control, hold the remote control straight in
–
front of the sensor at a distance of about 6-8" (15-20cm).
Choose the function you want to adjust by pressing once on one of the function buttons.
–
After pressing once on a specific function button, a quick flashing of the LED at the front of the sensor will
–
occur. At this stage, you can change the setting by pressing the (+) or the (-) buttons, every push will
increase or decrease one level.
After finishing the adjustment, turn the water supply back on.
–
th
Version 2, 16
March 2021, Page 4 of 9