Coram Showers OPTIMA 매뉴얼 - 페이지 11

{카테고리_이름} Coram Showers OPTIMA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coram Showers OPTIMA 16 페이지. Extender pack
Coram Showers OPTIMA에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지), 매뉴얼 (2 페이지)

페이지 인쇄

a: Place the bottom rail onto the tray with its end mouldings inserted into the corner post and wall channel.

b: Centre the bottom rail between the corner post and wall channel so that there is an equal gap at each end.

Push fit the 'short flipper seals' onto the top and bottom

edges of the fixed panels - flush against the metal profile.

Ensure the flipper seal 'flaps' are on the inside of the

fixed panels.

Note: Wetting the glass with water will help to fit the seals.

Outside

face of fixed

panels

Outside

face of

fixed

panel

Position the fixed panels into the corner post and wall

channel and slide down so they fully slot onto the end

mouldings of the bottom rail. Inside the enclosure, ensure the

panels sits in the 'fixed panel brackets', slide the brackets

along the rail and position under the panels as shown.

Outside

face of

fixed

panel

Fixed

panel

bracket