Dynojet Power Commander 3 설치 지침 - 페이지 2

{카테고리_이름} Dynojet Power Commander 3에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power Commander 3 4 페이지. For 2006-2008 suzuki m109r / c109r
Dynojet Power Commander 3에 대해서도 마찬가지입니다: 설치 지침 (2 페이지), 설치 지침 (3 페이지)

페이지 인쇄
Dynojet Power Commander 3 설치 지침
Unplug
Unplug
1
Remove the main seat and both side
covers.
2
Remove the fuel tank.
3
Remove the air box.
There are several hoses going into the
air box. We recommend referring to the
service manual for proper removal and
installation.
4
Route the wiring harness from the PCIII
behind the left hand side of the frame and
go towards the throttle bodies (Fig. A).
5
Unplug the stock wiring harness from each
injector (Fig. B).
6
Plug the connectors from the PCV inline
of the stock injectors and the stock wiring
harness (Fig.C).
Orange - cylinder 1- front
Yellow - cylinder 2 - rear