Dynojet Power Commander 3 설치 지침 - 페이지 3

{카테고리_이름} Dynojet Power Commander 3에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power Commander 3 4 페이지. For 2006-2008 suzuki m109r / c109r
Dynojet Power Commander 3에 대해서도 마찬가지입니다: 설치 지침 (2 페이지), 설치 지침 (3 페이지)

페이지 인쇄
Dynojet Power Commander 3 설치 지침
Ground
330-411
www.powercommander.com
Unplug
7
Unplug the Throttle Position Sensor
connector (Fig. D).
This connector is located on the right hand
side of the throttle bodies and is GREY in
color.
8
Plug the PCIII connectors in-line of the
stock wiring harness and TPS
9
Route the ground wire from the PCIII thru
the front hole in the battery box.
10 Attach the ground wire from the PCIII to the
negative side of the battery (Fig. E).
11 Install the PCIII under the left hand side
cover. Zip tie the unit to the metal brace
near the ECU (Fig. F).
12 Reinstall air box and fuel tank.
06-08 Suzuki M109R - 3