Coram Showers OPTIMA OFFSET QUADRANT 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Coram Showers OPTIMA OFFSET QUADRANT에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coram Showers OPTIMA OFFSET QUADRANT 9 페이지.
페이지 인쇄2
The Offset Quadrant can be assembled with the offset on either the right
or left. Note: The following instructions show installation of the Quadrant.
a
3
X
ø 6.5
mm
a: Place the wall channels on the tray ensuring they are vertical and an equal distance back from the front of the tray.
Place masking tape against the wall before marking drill hole positions, this will help prevent the drill bit slipping. Drill 6.5mm
holes, 30mm deep and insert the wall plugs.
b: Apply sealant to the back of the wall channels. c: Fix the wall channels to the walls using 8 x 32mm screws and screw caps.
a
4
a: Place the bottom rail onto the tray with its end mouldings inserted into the wall channels.
b: Centre the bottom rail between the wall channels so that there is an equal gap at each end.
b
X
X = Door widths
800 = 780 - 805mm
900 = 880 - 905mm
b
=
X
X = Widths
1000 x 800 = 980 - 1005mm
1200 x 800 = 1180 - 1205mm
1200 x 900 = 1180 - 1205mm
c
32mm
Y
Y = Widths
1000 x 800 = 780 - 805mm
1200 x 800 = 780 - 805mm
1200 x 900 = 880 - 905mm
Inside
=
3