Dynojet POWER COMMANDER FC 설치 지침 - 페이지 3

{카테고리_이름} Dynojet POWER COMMANDER FC에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet POWER COMMANDER FC 4 페이지. Fuel controller for yamaha zuma 125 2009; yamaha zuma 125 2010; yamaha zuma 125 2011; yamaha zuma 125 2012; yamaha zuma 125 2013; yamaha zuma 125 2014
Dynojet POWER COMMANDER FC에 대해서도 마찬가지입니다: 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지)

페이지 인쇄
Dynojet POWER COMMANDER FC 설치 지침
FIG.A
FIG.B
FIG.C
IFC17004.01
www.powercommander.com
1
Remove the main seat and the passenger seat.
2
Remove the covers for each side of the fuel tank as shown in Figure A.
3
Prop the front of the fuel tank up.
4
Slide the junction box that is under the main seat from it's rubber sleeve.
This allows room for the PCFC harness.
5
Route the PCFC harness underneath the sub frame crossover as shown in
Figure B.
6
Unplug the stock wiring harness from the throttle bodies as shown in Figure C.
This is a 16-pin brown connector located under the fuel tank on the right hand
side of the bike.
2008-2010 Kawasaki ZX-10R - 3