Dynojet POWER COMMANDER FC Installation Instructions - Page 3

Browse online or download pdf Installation Instructions for Motorcycle Accessories Dynojet POWER COMMANDER FC. Dynojet POWER COMMANDER FC 4 pages. Fuel controller for yamaha zuma 125 2009; yamaha zuma 125 2010; yamaha zuma 125 2011; yamaha zuma 125 2012; yamaha zuma 125 2013; yamaha zuma 125 2014
Also for Dynojet POWER COMMANDER FC: Installation Instructions (5 pages), Installation Instructions Manual (6 pages), Installation Instructions Manual (6 pages), Installation Instructions (5 pages)

Print Page
Dynojet POWER COMMANDER FC Installation Instructions
FIG.A
FIG.B
FIG.C
IFC17004.01
www.powercommander.com
1
Remove the main seat and the passenger seat.
2
Remove the covers for each side of the fuel tank as shown in Figure A.
3
Prop the front of the fuel tank up.
4
Slide the junction box that is under the main seat from it's rubber sleeve.
This allows room for the PCFC harness.
5
Route the PCFC harness underneath the sub frame crossover as shown in
Figure B.
6
Unplug the stock wiring harness from the throttle bodies as shown in Figure C.
This is a 16-pin brown connector located under the fuel tank on the right hand
side of the bike.
2008-2010 Kawasaki ZX-10R - 3