Adesso 5100 매뉴얼 - 페이지 13

{카테고리_이름} Adesso 5100에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Adesso 5100 19 페이지.

Before adding a suffix

Prefixes and suffixes Up to ten characters were added.

Add the prefix process:

Example 1

1, add a prefix byte character "®", ASCII code corresponding to the number of decimal 174.1. Scan"to enter / exit

the programming mode" to make the device into programming mode.

2. Scan"Configuring a prefix of the first byte."

3. Bytecode sequentially Scan the value "1", "7", "4."

4. Scan "to enter / exit the programming mode."

Add the suffix process:

Example 2add a suffix byte character is "$", ASCII code corresponding to the number of decimal 036

1. Scan "to enter / exit the programming mode" to make the device into programming mode.

2. Scan "configuration suffix first byte."

3. Successively scan byte code value "0", "3", "6."

4. Scan "to enter / exit the programming mode."

Add multiple byte prefix:

Example 3 to add more bytes prefix

1. Scan "to enter / exit the programming mode" to make the device into programming mode.

2. Scan "Configuring a prefix of the first byte."

3. The Scan followed the first one byte code value.

4. Scan "Configuration prefix first two bytes."

5. Successively scan the first two byte code value.4,5

6. Repeat step......

7. Scan "to enter / exit the programming mode."

Add multiple byte suffix:

Similar to adding multiple prefixes.

Clear all prefixes:

Scan "All Clear prefix" bar code.

Clear all suffixes:

Scan "All Clear prefix" bar code.

13 / 18