AGS Merlin 2000S 설치 및 운영 매뉴얼 - 페이지 7

{카테고리_이름} AGS Merlin 2000S에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AGS Merlin 2000S 12 페이지. Gas proving and ventilation interlock system
AGS Merlin 2000S에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 설치 및 운영 매뉴얼 (12 페이지)

페이지 인쇄

Installation & Operation Manual

MODE

Under normal working conditions the Merlin 1500S monitors the ventilation and the

concentration level of Carbon Dioxide (CO

the CO

level is at alarm level, the panel will shut off the gas supply.

The Merlin 1500S features a 'CO

supply in the event of a fan failure. The 'CO

will only be available to use when 'Fan fault' LED illuminates Red. To enable the CO

button has to be pressed for 5 seconds. The Fan Fault LED will go off and CO

come on.

In this mode, the Merlin 1500S will monitor only the CO

environment. This mode will allow the gas valve to open for 8 hours each time the system is

energised, provided there are satisfactory levels of CO

At the end of 8 hours, the gas valve will close and CO

To reinstate the system the panel has to be restarted.

CO2 Mode will be permanently disabled if a CO2 monitoring device is not connected.

Specification

Model:

Visual Indication

Mains Electrical Power Input

Gas Solenoid Valve Output

Current Consumption

Internal Fuse

Operating Temperature

Audible Alarm Buzzer dB

Internet connection

Housing Material

Flame Rating

Approvals

O/All Dimensions (H x W x D) mm / inch

1500S IOM Rev: 08

Mode' - this allows the user to have the access to the gas

01-20

) in the air

In the event of ventilation failure or if

Mode' button located on the front of the panel

levels to ensure there is a safe working

Mode LED will be flashing.

1500S

LED

100-120VAC

12W max (50mA) @ 120VAC

3.15A

32 – 104°F 0-95%RH Non-Condensing

65 dB (300mm distance in quiet conditions)

N/A

Polylac PA-765

UL 94

CE, RoHS

7.08 x 10 x 3.03"

Merlin 1500S

Mode, this

Mode LED will