AGS Mini Merlin CH4CO 설치 및 운영 매뉴얼 - 페이지 13

{카테고리_이름} AGS Mini Merlin CH4CO에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AGS Mini Merlin CH4CO 16 페이지. Dual gas detector, methane & carbon monoxide gas
AGS Mini Merlin CH4CO에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

1. Wiring the Device

Installation & Operation Manual

Touch Button

POWER UP

Press and hold for 3 seconds when electrical supply is connected.

RESET

To reset after a gas alarm - press the touch button once.

TEST

Press and hold for 3 seconds when powered to test screen colouration, audible alarm and

gas/BMS relay.

Remote Shut Off

If this device is connected to remote shut off devices (optional).

When activated, the digital display will indicate that it/they are activated

and will shut off the gas supply if installed and configured to do so.

End of Life Indicator

This message indicates that the detector has reached its expected operational lifecycle.

No gas levels will be displayed. Contact your supplier and replace the unit immediately.

The expected lifecycle may vary depending on environmental conditions.

Maintenance

Keep your detector in good working order follow these basic principles;



DO carefully remove any accumulated dust from the outer enclosure once a month.



NEVER use detergents or solvents to clean your device – this may permenantly or

temporarily damage the gas sensing elements.



NEVER spray air fresheners, hair spray, paint or other aerosols near the device.



NEVER paint the device. Paint will seal vents and interfere with the device.

High concentrations of alcohol found in many products may damage, deteriorate or affect

the gas sensing elements – such as; wine; deodorants; stain removers; thinners etc.

Other gases and substances to avoid; Corrosives (i.e. chlorine & hydrogen chloride); Alkali

metals; Basic or acidic compounds; Silicones; Tetraethyl lead; Halogens and halogenated

compounds.

Rev: 12 01-20

AGS Mini Merlin CH4CO