AGS Mini Merlin CH4CO Installatie- en bedieningshandleiding - Pagina 13

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} AGS Mini Merlin CH4CO. AGS Mini Merlin CH4CO 16 pagina's. Dual gas detector, methane & carbon monoxide gas
Ook voor AGS Mini Merlin CH4CO: Gebruikershandleiding (16 pagina's)

Pagina afdrukken
Installation & Operation Manual

Touch Button

POWER UP
Press and hold for 3 seconds when electrical supply is connected.
RESET
To reset after a gas alarm - press the touch button once.
TEST
Press and hold for 3 seconds when powered to test screen colouration, audible alarm and
gas/BMS relay.

Remote Shut Off

If this device is connected to remote shut off devices (optional).
When activated, the digital display will indicate that it/they are activated
and will shut off the gas supply if installed and configured to do so.

End of Life Indicator

This message indicates that the detector has reached its expected operational lifecycle.
No gas levels will be displayed. Contact your supplier and replace the unit immediately.
The expected lifecycle may vary depending on environmental conditions.

Maintenance

Keep your detector in good working order follow these basic principles;
DO carefully remove any accumulated dust from the outer enclosure once a month.
NEVER use detergents or solvents to clean your device – this may permenantly or
temporarily damage the gas sensing elements.
NEVER spray air fresheners, hair spray, paint or other aerosols near the device.
NEVER paint the device. Paint will seal vents and interfere with the device.
High concentrations of alcohol found in many products may damage, deteriorate or affect
the gas sensing elements – such as; wine; deodorants; stain removers; thinners etc.
Other gases and substances to avoid; Corrosives (i.e. chlorine & hydrogen chloride); Alkali
metals; Basic or acidic compounds; Silicones; Tetraethyl lead; Halogens and halogenated
compounds.
Rev: 12 01-20
AGS Mini Merlin CH4CO
13