AgSense Crop Link Lite 배선 지침 - 페이지 8

{카테고리_이름} AgSense Crop Link Lite에 대한 배선 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AgSense Crop Link Lite 12 페이지. 2017-18 4-20ma inputs and scaled voltage inputs
AgSense Crop Link Lite에 대해서도 마찬가지입니다: 배선 지침 (12 페이지)

페이지 인쇄

Submersible Tank Level Sensor Wiring:

1. Install the White wire into the 12v Out terminal as shown above.

2. Install the Brown wire into the GND terminal as shown above

3. Install the Yellow wire into any input (AN1 to AN4) terminal as shown above.

4. Green wire is not used and can be capped off.

Note: DO NOT shorten or lengthen the cable on this transducer. This cable contains an air vent

tube and filter that is critical to this transducer functioning correctly – do not modify!!

Ashcroft KM45 series

Page 6