Gama Sonic BAYTOWN II GS-105SG 사용 설명서 - 페이지 4

{카테고리_이름} Gama Sonic BAYTOWN II GS-105SG에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gama Sonic BAYTOWN II GS-105SG 7 페이지. Solar lamp post

Flat installation (Installing the lamp post without anchor):

8.1 Mark three holes with the base plate as a

template. With an electric drill, drill the

holes into concrete. Assemble with the

hardware provided.

9.1 Attach Part (E) to Part (F) Using the

four small screws from, as shown.

9.3 Place anchor in desired location and apply downward pressure while turning

the Turning bar clock wise.

9.4 Occasionally check the anchor Level Tool to ensure your digging is straight.

9.5 Stop turning once Part (I) is flat with ground level.

9.6 Remove the Turning Bar(G).

9.7 Screw the fixture to the Anchor.

EZ Anchor Installation Instructions:

8.2 After assembling attach the three

decorative caps provided.

and screw the fixture to the base.

9.2 Insert the Turning bar (G) in

the hole through the anchor

stake (H) as shown.