Gama Sonic BAYTOWN II GS-105SG Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oświetlenie zewnętrzne Gama Sonic BAYTOWN II GS-105SG. Gama Sonic BAYTOWN II GS-105SG 7 stron. Solar lamp post
Drukuj stronę
Flat installation (Installing the lamp post without anchor):
8.1 Mark three holes with the base plate as a
template. With an electric drill, drill the
holes into concrete. Assemble with the
hardware provided.
9.1 Attach Part (E) to Part (F) Using the
four small screws from, as shown.
9.3 Place anchor in desired location and apply downward pressure while turning
the Turning bar clock wise.
9.4 Occasionally check the anchor Level Tool to ensure your digging is straight.
9.5 Stop turning once Part (I) is flat with ground level.
9.6 Remove the Turning Bar(G).
9.7 Screw the fixture to the Anchor.
EZ Anchor Installation Instructions:
8.2 After assembling attach the three
decorative caps provided.
and screw the fixture to the base.
9.2 Insert the Turning bar (G) in
the hole through the anchor
stake (H) as shown.
I
G
H
4