Dynojet Power Vision 빠른 시작 매뉴얼 - 페이지 11
{카테고리_이름} Dynojet Power Vision에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power Vision 17 페이지. For 2019-2022 can-am ryker 600/900
Dynojet Power Vision에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지), 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (7 페이지), 매뉴얼 (7 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (7 페이지)
페이지 인쇄
FLASHING A DYNOJET PRE-CONFIGURED TUNE FILE
• Select Program Vehicle.
• Select a Dynojet Pre-Configured
Tune File to flash.
• Touch Select.
Note: You can edit any tune that's loaded in the Tune Manager prior to flashing your ECM. The Power Vi-
sion allows you to make basic adjustments to your tunes directly on the device without using a computer.
In order to gain full access to your tune files, you'll need to download them from the Power Vision to WinPV,
our custom tuning software.
Use the following steps to flash a
Dynojet Pre-Configured Tune to the ECM:
• Select Load Tune.
• Verify the tune information. If
the tune information is correct,
touch Continue.
The tune is now ready.
• Select Flash to flash this tune to the ECM.
Note: During the flash process, do not
turn off the bike. Once complete, you will
be prompted to turn the bike off for 10
seconds.
• Select Edit to edit this tune.
• Select Exit to exit the screen without
any changes.
• Select Dynojet
Pre-Configured Tunes.
The Power Vision will automati-
cally search for compatible tunes.
• Select a slot to save the selected
tune file.
Note: If there is any data
in the selected slot, it will
be overwritten.
• Touch Select.
Power Vision Quick Start Guide - 11